Many people know that conventional lettering film can be obtained by using ordinary equipment on the market, but in the process of heat transfer, as long as you are not paying attention, it will easily affect the effect of heat transfer, so we must first understand the heat transfer The three elements of printing and the adjustment of the heat transfer machine can make the effect of the thermal transfer lettering film complete.

　　First, let's talk about the level adjustment of the hot stamping machine. There is a basic requirement to place the floor of the hot stamping machine. The table must be flat and stable, and the hot stamping machine must be in a stable and horizontal state. If the level of the heat press machine is not adjusted properly, it is easy to cause a safety accident.

　　The second thing is to check the pressure of the heat transfer equipment. This is to accurately calculate the heat transfer pressure based on the area of ​​the heating plate. The normal heat transfer pressure setting should be controlled above 0.2KG/cm²! Manual operation is also required. To test the pressure.

　　There is also a simple way to test the pressure of the heat transfer machine. Put a release film on the pressing plate and try to pull the release film. The release film can be pulled manually, which is the heat transfer machine setting. The pressure is not enough, this needs to be re-zoned or even!

　　Let’s talk about the temperature of the heat transfer. You need to read the specifications of the heat transfer product before turning it on. We must check the temperature first. The temperature plays a role in dissolving and melting the hot melt adhesive.

　　We also need to test the temperature resistance of the test-iron printing fabric, the hole diameter and thickness of the thermal transfer film printing fabric. Humidity and temperature of the heat transfer environment. Normally, we use the test ironing result as the benchmark, and the temperature measurement method is to use a temperature measuring instrument for multi-point testing.

　　Let’s talk about his thermal transfer time. We usually need to test it according to the needs of the transfer. It can only be determined after the test. Generally, it should be controlled within 10-15 seconds.

　　Tips:

　　A layer of anti-sticking cloth or high temperature cloth should be added on the heat transfer panel. We recommend that the heat transfer temperature should be around 10-20 degrees; then the fabric should be pressed and smoothed before pressing, especially for the heat transfer of ready-made garments. , Don’t cause uneven pressure due to the corner buttons on the clothing. We also need to follow the correct tearing method, such as cold tearing or hot tearing. We have to perform a washing test, which requires cooling for one day and then putting it in the washing machine for machine washing.